VEHICLE SYSTEMS
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
STEERING CONTROL VALVE
Models 950BNS and 950BS
INSTALL STEERING CONTROL VALVE 4102-12
1.
2.
3.
4.
5.
6.
7.
8.
9.
Check and make a replacement, if necessary, of
all O-ring seals before the steering control valve
is installed.
Put steering control valve (1) in position on the
machine.
Install three bolts (2) that hold the steering
control valve to the hydraulic tank.
Tighten bolts (3) that hold the hose assembly to
the manifold and the manifold to the steering
control valve.
Install bolts (4) that hold the manifold to the
steering control valve.
Install bolts (5) that hold the manifold to the
steering control valve.
Connect the clips and install bolt (7) on the
steering control valve.
Connect hose assemblies (6) and (8) to the
steering control valve.
Fill the hydraulic tank.
end by:
a) separation of anti-pivot link
5-387
