OPERATOR’S STATION
PARKING BRAKE
(Models 950BNSCE,
REMOVE PARKING BRAKE CABLE
1.
2.
3.
4.
5.
6.
7.
Push top of boot (1) down toward the floor
plate so the bottom two bolts in the shroud
can be removed.
Remove four bolts (4) from each side of
the steering column. Remove shrouds (2)
and (3) from the steering column.
Remove knob (5) and locknut (6) from brake
cable assembly (7).
Loosen nut (8).
Remove two cotter pins (9) and pins (10).
Loosen nut (11).
Turn parking brake cable (7) counterclock-
wise until it can be removed from valve (12).
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
CABLE
950 BSCE)
INSTALL PARKING BRAKE CABLE
1. Screw threaded end of parking brake cable
(7) into valve (12).
2. Tighten locknut (11).
3. Install pins (10) and cotter pins (9).
4. Tighten nut (8).
5. Tighten locknut (6) and install knob (5).
6. Place shrouds (3) and (2) in position on the
steering column and install bolts (4) that
retain them.
7. Position boot (1) on the shrouds.
5-492a/5-492b (blank)
