OPERATOR’S STATION
ADJUSTABLE
ASSEMBLE ADJUSTABLE STEERING
STEERING
COLUMN
4310-16
Tools Needed
A
1P510
Driver Group
1
1.
2.
3.
4.
5.
6.
Use tooling (A) to install the bearing in gear (1)
even with the surface of the gear.
Install gear assembly (3), washers and pin in the
housing. Tighten setscrew (5).
Install bellcrank and pin (2). Tighten setscrews
(4).
Use tooling (A) to install the lip seal in the cap
even with the bottom of the chamfer in the bore.
Use a press to install bearing (7) on tube assem-
bly (6). Install bearing with the seal opposite the
threaded end of the tube assembly.
Install retainer ring (8) on the tube assembly.
TM 5-3805-258-24-2
DISASSEMBLY AND ASSEMBLY
COLUMN
5-515
