T M 5 - 3 8 0 5 - 2 6 2 - 20
INSPECTION (SHEET 2 OF 2)
(7) Check for indication of hydraulic oil leakage between gland
Slight dampness is permissible .
and tube.
(8) Place BUCKET control lever in CROWD position until bucket is completely
rolled back then return control lever to NEUT. position.
(9) Check for indication of hydraulic oil leakage between cylinder rod and
gland. Slight dampness is permissible.
(10) Check for indication of hydraulic oil leakage between gland and tube.
Slight dampness is permissible.
(11) Lower bucket to ground and turn off engine.
(12) Repeat steps (1) through (11) above to inspect remaining bucket tilt
cylinder assembly.
11-3
