TM 5-3805-262-20
3-24. ACCESSORIES TROUBLESHOOTING (CONT)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. WIPER ARM DOES NOT RETURN TO PARK POSITION (Cont).
Step 3.
Remove windshield wiper motor (page 10-13).
Check link for loose or missing hardware.
Check wiper arm for loose or missing hardware.
Check wiper shaft for damage.
If hardware loose, tighten; if missing, replace. If wiper shaft
damaged, replace (page 10-14).
5. WASHER FLUID DOES NOT SPRAY ON WINDSHIELD.
Step 1.
Unlock and open front access door.
Check if fluid reservoir is filled with windshield washer cleaning
compound.
3-164
a. If fluid reservoir is not filled with windshield washer cleaning
compound, fill.
b. If fluid reservoir is filled with windshield washer cleaning
compound, go to step 2 below.
from hose, check hose between
windshield washer control and fluid reservoir for cracks,
b r e a k s, o b s t r u c t i o n,
or other damage. Replace hose as necessary
(page 10-22). If hose is okay, replace windshield washer control
(page 10-22).
