TM 5-3805-262-20
REMOVAL (SHEET 2 OF 2)
(c) Loosen hose clamp (6) and disconnect reducer (7) from tube (9). Remove
reducer (7) and hose clamp (6).
(d) Remove engine top hood (page 9-11).
(e) Loosen hose clamps (8 and 10); disconnect and remove tube (9) and elbow
(11). Remove hose clamps (8 and 10).
(f) Disconnect connector (12) from adapter (14); remove adapter (14).
(g) Loosen clamp and disconnect air hose from adapter (18). Do this by
grasping air hose and firmly pulling from adapter.
(h) Remove four capscrews (15), nuts (16), and lock washers (17). Remove
adapter (18) and gasket (19). Discard gasket (19).
(i) Support restriction indicator (22) then loosen and remove fitting (20)
and lock washer (21). Remove restriction indicator (22) and tube (13),
with connector (12) and fitting (20) attached, from loader.
4-23
