TM
REMOVAL (SHEET 2 OF 2)
5-3805-262-20
(8)
( 9 )
(10)
(11)
(12)
(13)
(14)
(15)
(16)
In operators compartment, at right instrument panel, remove
by unscrewing from fuel shutoff cable.
handle (26)
Remove nut (27) then pull fuel shutoff cable down from instrument panel
and remove from vehicle.
Beneath cab deck, remove two screws (28), nuts (29), lock washers (30),
and washers (31). Remove clamp (32) from accelerator cable.
Remove nut (33) and lock washer (34); disconnect ball joint (35) from
accelerator pedal (42). If necessary, loosen nut (36) then remove ball
joint (35) from accelerator cable. Remove accelerator cable from loader.
In operator’s cab at bottom of accelerator pedal (42), remove two
retaining rings (37) then pull pivot pin (38) from pivot bracket (51) and
a c c e l e r a t o r p e d a l ( 4 2 ).
Beneath cab deck, remove lock nut (39) and washer (40); remove spring
(41) from capscrew (44) and unhook from accelerator pedal (42).
In operator’s cab, remove accelerator pedal (42); if necessary, remove
pad (43).
Remove capscrew (44), nut (45), and lock washer (46).
Remove two capscrews (47), nuts (48), and lock washers (49). Remove cable
bracket (50) and pivot bracket (51).
4-57
