TM 5-3805-262-20
REASSEMBLY
(1)
(2)
( 3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
( 14)
(15)
(16)
(17)
Install two plugs (58) in right-hand instrument panel.
Position one washer (55), one lock washer (57), and air pressure warning
alarm (56) at rear of right-hand instrument panel.
Install second washer (55) and one screw (54).
Install two screws (53) in COLD START switch (51).
Install nut (52) on COLD START switch (51).
Position COLD START switch (51) through right-hand instrument panel. In-
stall round nut (50). Tighten round nut (50) and nut (52).
Position resistor (49) at rear of right-hand instrument panel.
Install screw (45), washer (48), lock washer (47), and nut (46).
Position DIMMER COMPT LIGHTS switch (44) through right-hand instrument
panel. Install two lock washers (43) and screws (42).
Install lock washer (41) on ignition switch (39) and guide ignition
switch through right-hand instrument panel.
I n s t a l l n u t ( 4 0 ) t o s e c u r e i g n i t i o n s w i t c h ( 3 9 ).
Slide HYDRAULIC FILTER warning light (38) through right-hand instrument
panel front panel. Rotate until tab alines with instrument panel notch,
then press into instrument panel and rotate to secure. Connect resistor
(37) to ignition switch.
Position FLOOD LIGHTS switch (36) in right-hand instrument panel. Install
lock washer (35) and boot (34).
Position vehicle lights switch (33) through right-hand instrument panel
and secure using four screws (32). Install vehicle lights switch (33)
knobs.
Install circuit breaker (31) and connect two terminals (30) as tagged.
Install circuit breaker (29) and connect terminal (27) and eyelet termi-
nal (28) as tagged.
Install two circuit breakers (26) in right-hand instrument panel.
5-61
