TM 5-3805-262-20
INSTALLATION
( 1 )
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Install grommet (15) and adapter (14) in housing (12).
Install washer (13) on threaded stud of housing (12) and position housing
with washer on right front fender.
Install and tighten nut (10) and lock washer (11).
Position lamp unit (6) near front of housing (12) and connect terminal
(7) and connectors (8 and 9) by grasping in your fingers, alining, and
pushing firmly .
Install lamp unit (6) on housing (12) using three clips (5).
Install lamp (4) by alining lamp base with socket, pushing lamp in, and
turning 1/4 turn clockwise .
If removed, install screws (1) on door (3) using retaining’rings (2) .
Position door (3) over lamp unit (6) and tighten three screws (1) to
s e c u r e .
5-101
