TM 5-3805-262-20
REMOVAL (SHEET 2 OF 2)
(2)
Remove six capscrews and lock washers.
(3) Remove brake caliper from axle end.
INSTALLATIOIN
(1)
Using chain hoist, put brake caliper against mounting bracket on axle
end.
( 2)
(3)
(4)
(5)
(6)
(7)
Install six lock washers and capscrews. Disconnect chain hoist.
Tighten capscrews to 340 to 420 lb-ft.
Install brake shoes and linings (page 7-22).
Connect tubing to brake caliper (page 7-41 or 7-49).
Install front or rear wheels (page 8-9).
Remove jack stands and lower loader to ground.
7-29
