TM 5-3805-262-20
10-4. WINDSHIELD WIPER MOTOR MAINTENANCE (CONT)
a. W i p er Motor (cont) .
DISASSEMBLY
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Using long nose pliers, remove retainer (3) and clip (5) then remove two
spacers (4 and 6).
Remove link (7) by pulling from drive arm (9) stud and bolt (16).
Loosen and remove nut (8) then pull drive arm (9) from motor assembly
( 1 2 ) s h a f t .
Remove washer (10).
Support wiper motor assembly (12) and loosen and remove two screw assem-
bled washers (11). Remove wiper motor assembly.
Loosen and remove three screws (13) by inserting screw driver blade
through bracket (23) holes.
Remove wiper shaft (22) and assembled parts as an assembly from bracket
( 2 3 ).
Loosen and remove nut (14) and washer (15); remove bolt (16) from wiper
s h a f t ( 2 2 ).
Loosen and remove cap (17),
lock washer (18), driver (19), boot (20), nut
(21), washer (l), and felt washer (2) from wiper shaft (22). Discard boot
(20) and felt washer (2).
10-14
