TM 5-3805-262-34
4-3. TRANSMISSION MAINTENANCE (CONT)
f. High Range Clutch and Transfer Gear (Cont).
REASSEMBLY
(10)
(11)
(12)
(SHEET 2 OF 2)
Install new seal (8) on high range clutch piston (7) groove. Use 5/8 inch
diameter rod to push seal into groove.
Lubricate seal (10) using lubricating oil.
Put high range clutch piston housing (12) on wood blocks. Start high
range clutch piston (7) into piston housing, Using soft hammer, hit
clutch piston until it is seated in clutch piston housing. Using screw
driver, aline ears on clutch piston with notches in clutch piston
housing.
(13) Put high range clutch piston housing (12) in hydraulic press with high
range clutch piston (7) side up.
(14) Put return spring (6), convex side up, on high range clutch piston (7).
(15) Compress return spring (6) using hydraulic press and suitable tool and
install retaining ring (5).
4-184
