TM 5-3805-262-34
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Install new O-ring (10) on plunger (8).
Apply silicone lubricant to O-ring (10) and bore of valve body (11).
Install spring (9) on plunger (8).
Install plunger (8) and spring (9) in valve body (11).
Hold plunger (8) in valve body (11) and install new valve (7) on end of
plunger.
Put a drive pin punch through
hole in plunger (8) to prevent
it from moving. Install new
washer (6) and lock nut (5).
Tighten lock nut securely.
Install new gasket (4) in valve
cover (3).
Position valve cover (3) and
gasket (4) on valve body (11).
Install and tighten two washers
(2,) and capscrews (1).
3-423
