TM 5-3805-262-34
3-22. CONTROL VALVE ASSEMBLY MAINTENANCE (CONT)
c. Tilt Spool (Cont).
DISASSEMBLY (SHEET 3 OF 3)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
( 2 4)
(25)
(26)
(27)
(28)
(29)
Install rod or small prybar in
spool eyes as shown.
Loosen screw (15) using
wrench and hexagon key.
Remove coil and spacer
assembly (15 thru 18).
socket
Put spacer (16) in a soft
jawed vise.
Loosen and remove screw (15).
Remove washer (18) and coil
(17) from spacer (16). Remove
spacer from vise.
Remove washer (19) from detent housing (20).
Remove detent housing (20) from control valve body.
Remove spring seat (21),
spring (22), and spring seat (23).
Remove washer (24) and O-ring (25). Discard O-ring.
Remove stud (26) with O-ring (27) from spool (30). Remove and discard
O-ring.
Remove spring (28) and poppet
Remove control valve assembly
eyes.
Pull spool (30) from control
valve body.
Put a rod through one hole in
spool (30). Put spool (30)
with rod installed in soft
jawed vise as shown.
Loosen and remove spool eye
(31). Remove spacer (32) and
O-ring (33). Discard O-ring.
Remove spring (34) and poppet
(35) from spool (30).
(29) .
from vise. Remove rod or prybar from spool
3-674
