• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
OPERATING ON SLOPES
LOWERING LOADER ARM WITH ENGINE STOPPED

Loader, Light, Scoop: 2.5 Cubic Yard Multipurpose Clamshell Bucket 4-Wheel Drive Model 924G
Page Navigation
  63    64    65    66    67  68  69    70    71    72    73  
img
. . .
TM 5-3805-290-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
PARKING MACHINE - CONTINUED
0005 00
3.
Leaving Machine.
a.
Inspect cab interior for debris. Remove debris.
WAR N I N G
Use caution and maintain three-point contact at all times when dismounting machine. Failure to follow this
warning may result in injury or death to personnel.
b.
Dismount machine using grabhandles and ladder. Face machine when dismounting.
c.
Turn battery disconnect switch to OFF position.
d.
If leaving machine for an extended period of time, i.e., a month or more, remove key from battery disconnect
switch.
e.
Secure machine against vandalism. Install all covers and vandalism protection locks.
f.
Perform After operation PMCS (WP 0011 00 and WP 0012 00).
STOPPING ENGINE IF AN ELECTRICAL MALFUNCTION OCCURS
0005 00
1.
Turn engine start switch to OFF position.
2.
If engine does not stop, perform the following steps:
a.
Open engine enclosure access door on right side of machine.
b.
Pull outward on connector located on fuel pump solenoid.
427-B0549
c.
Report problem to your supervisor. DO NOT operate machine until problem has been corrected.
0005 00-8


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.