• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE
ENGINE - CONTINUED

Loader, Light, Scoop: 2.5 Cubic Yard Multipurpose Clamshell Bucket 4-Wheel Drive Model 924G
Page Navigation
  109    110    111    112    113  114  115    116    117    118    119  
img
. . . . . . . . . . .
TM 5-3805-290-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - CONTINUED
3.
Engine Does Not Develop Full Power.
WARN I N G
If NBC exposure is suspected, personnel wearing protec-
tive equipment should handle all air cleaner media. Con-
sult your NBC Officer or NBC NCO for appropriate
handling or disposal procedures.
Refer to FM 3-3, Chemical and Biological Contamination
Avoidance, FM 3-5, NBC Decontamination, and FM 3-3-
1, Nuclear Contamination Avoidance.
NBC contaminated filters must be handled using ade-
quate precautions and must be disposed of by trained
personnel.
Failure to follow these warnings may cause injury or
death to personnel.
Check air cleaner service indicator If indicator is red, service engine air
(WP 0004 00).
precleaner and air cleaner (WP 0014
00) and retest. If problem still exists,
notify Unit Maintenance.
Check air cleaner service indicator If indicator is red, service engine air
4.
Engine Does Not Idle Properly.
precleaner and air cleaner (WP 0014
(WP 0004 00).
00) and retest. If problem still exists,
notify Unit Maintenance.
Engine Fails to Crank When Engine 1. Check position of shift lever
Place shift lever and F/N/R switch in
5.
N (NEUTRAL). If problem still
and F/N/R switch.
Start Switch is Turned to START.
exists, go to test step 2.
2. Check position of battery
Place battery disconnect switch to
disconnect switch.
ON. If problem still exists, go to test
step 3.
N OTE
A 30-minute cool down time may be required before circuit
breaker automatically resets.
3. Check for tripped 90-amp
Reset circuit breaker. If problem still
alternator circuit breaker (WP
exists, go to test step 4.
0004 00).
4. Check for tripped 60-amp main Reset circuit breaker. If problem still
circuit breaker (WP 0004 00).  exists, go to test step 5.
5. Check both batteries for dirty,
Clean dirty cables. If cable is
loose, or damaged battery
damaged or loose, notify Unit
cables (WP 0012 00).
Maintenance.
0010 00-8


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.