TM 5-3805-290-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM - CONTINUED
1. Ensure STOP LIGHT or SER. Select STOP LIGHT or SER.
11. Taillights Do Not Come On.
DRIVE function has been
DRIVE. If problem still exists, go to
selected on military light switch test step 2.
2. Check composite lights for
If any damage to lights is found,
damage.
notify Unit Maintenance.
1. Check windshield washer fluid
If reservoir is empty, fill reservoir
12. Windshield Washer Not Working.
reservoir (WP 0012 00).
(WP 0012 00). If problem still exists,
go to test step 2.
2. Check for blown fuse at fuse
If fuse is bad, request a replacement
panel (WP 0004 00).
fuse from Unit Maintenance. If fuse
is good, notify Unit Maintenance.
Check for blown fuse at fuse/
If fuse is bad, request a replacement
13. Windshield Wiper Not Working.
circuit breaker panel (WP 0004
fuse from Unit Maintenance. If fuse
is good, notify Unit Maintenance.
ENGINE
Engine Cranks but Fails to Start: 1. Check fuel tank gage with
If indication is empty, add fuel (WP
1.
engine start switch ON.
0013 00). If indication is OK, go to
Operating Temperature Above -25F
test step 2.
(-32C).
2. Check for blown start aid fuse
If fuse is bad, request a replacement
at fuse panel (WP 0004 00).
fuse from Unit Maintenance. If
engine still will not start, notify Unit
Maintenance.
3. Check for missing or empty
If ether canister is missing or empty,
ether canister at temperatures
notify Unit Maintenance.
+32F (0C) or below (WP
4. Check fuel pump solenoid
If plugged in, notify Unit
Maintenance.
connector (WP 0005 00).