TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
1. If CID 1403 FMI 03 is active, replace
2. Verify diagnostic code remains active.
1403 03 -
machine ECM (WP 0052 00).
(a) Inspect and clean harness connector
Cont.
2. If CID 1403 FMI 03 is not active, initial
contacts.
diagnostic code was probably caused
(b) Reconnect all harness connectors.
by a poor electrical connection or a
(c) Turn battery disconnect switch and
short at a harness connector that was
engine start switch to ON position (TM
disconnected and reconnected.
Resume normal machine operation.
(d) Operate machine (TM 5-3805-290-
10).
(e) Connect MSD (WP 0006 00) and
determine if CID 1403 FMI 03 is
active.
0009 00-131