TM 5-3805-290-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 2. Machine Control System - Continued.
(MID 081)
TEST OR INSPECTION
CORRECTIVE ACTION
CID FMI CODE
1403 06
427-B1882
N OT E
This test procedure may create other diagnostic codes. Ignore these created diag-
nostic codes and clear these diagnostic codes when original diagnostic code has
been corrected. Ensure diagnostic code CID 1403 FMI 06 is active before per-
forming this procedure.
1. Check clutch 3 (reverse) solenoid.
1. If CID 1403 FMI 06 changes to CID
(a) Turn battery disconnect switch and
1403 FMI 05 when clutch 3 (reverse)
engine start switch to ON position (TM
solenoid is disconnected, clutch 3
5-3805-290-10). Do not start engine.
(reverse) solenoid has failed. Repeat
(b) Connect MSD (WP 0006 00) and
this test to verify clutch 3 (reverse)
observe status of diagnostic code.
solenoid failure. Replace modulating
(c) Disconnect clutch 3 (reverse) solenoid
valve (WP 0177 00).
(WP 0177 00) from wiring harness.
2. If CID 1403 FMI 06 remains active, go
to Test 2.
