TM 5-3805-290-23-2
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INCLUDING LUBRICATION INSTRUCTIONS - CONTINUED
0020 00
Table 1. Unit Preventive Maintenance Checks and Services (PMCS) for the 924G Wheel Loader - Continued.
LOCATION
ITEM TO
CHECK/
MAN-
NOT FULLY MISSION
ITEM
SERVICE
NO.
INTERVAL HOURS
PROCEDURE
CAPABLE IF:
1
250 Hours
Fuel System
Filters
WARN I N G
DO NOT perform fuel system checks, inspections, or
maintenance while smoking or near fire, flames, or
sparks. Fuel may ignite, causing injury or death to
personnel or damage to equipment.
To prevent injury to personnel, wear protective eye
covering and gloves.
a. Replace fuel system primary filter ele-
ment (WP 0036 00).
b. Replace fuel system secondary filter
element (WP 0036 00).
a. Inspect condition of all three V-belts.
2
250 Hours
Check for loose, torn, frayed, missing,
Air
excessively worn, or unevenly worn
Conditioner
belts. Belts should deflect 0.55 to 0.79
V-Belts
in. (14 to 20 mm) under 25 lb (110 N)
of force.
b. Adjust belt tension or replace belts as
needed (WP 0046 00).
Check oil level in front and rear axles.
3
250 Hours
0.2
Differential
Add oil if level is low (WP 0091 00).
Hour
and Final
Drive - Front
and Rear
Axles
0020 00-3