TM 5-3805-290-23-2
FUEL FILTER BASES REPLACEMENT - CONTINUED
0037 00
SECONDARY FUEL FILTER BASE REMOVAL
0037 00
1.
Disconnect all fuel lines from secondary fuel filter
base assembly and set aside for re-use (WP 0038 00).
2.
Remove all fittings from secondary fuel filter base
assembly and set aside for re-use (WP 0038 00).
3.
Remove secondary two bolts (7) from fuel filter base
assembly (8).
4.
Remove secondary fuel filter base assembly (8) from
machine.
5.
Remove locking ring (9), cap (10), O-ring (11), and
plug (12) from secondary fuel filter base assembly (8).
Discard O-ring.
427-B0272
SECONDARY FUEL FILTER BASE INSTALLATION
N OT E
Lubricate O-ring with clean diesel fuel prior to installation.
1.
Install plug (12), new O-ring (11), cap (10), and locking ring (9) on secondary fuel filter base assembly (8).
2.
Position secondary fuel filter base assembly (8) on machine and install two bolts (7).
3.
Install all fittings and connect all hoses and lines to secondary fuel filter base assembly (WP 0038 00).
4.
Install secondary fuel filter (WP 0038 00).
5.
Run engine while checking for fuel system leaks (TM 5-3805-290-10).
WAR N I N G
Before operating equipment, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
6.
Secure steering frame lock in stowed position (TM 5-3805-290-10).
END OF WORK PACKAGE
0037 00-3/(0037 00-4 Blank)