TM 5-3805-290-23-2
CONTROL SWITCHES AND PANELS REPLACEMENT - CONTINUED
0049 00
RIGHT-SIDE CONTROL PANEL INSTALLATION
WARN I N G
Ensure battery disconnect switch is in OFF position before performing this task. Failure to follow this
warning may result in injury to personnel or damage to equipment.
CAU T I ON
Take care to ensure wiring is not damaged while performing this procedure.
1.
If necessary, install bulb (20) in rear windshield wiper/washer switch backlight fixture (17).
2.
If necessary, install bulb (19) in front windshield wiper/washer switch backlight fixture (15).
3.
Install rear windshield wiper/washer switch backlight fixture (17) in bracket (18).
4.
Install front windshield wiper/washer switch backlight fixture (15) in bracket (16).
5.
Install toggle switch (13) in panel cover (14).
6.
Connect wiring harness connector (12) to back of toggle switch (13).
7.
Install windshield wiper switches (WP 0050 00).
RIGHT-SIDE CONTROL CONSOLE REMOVAL
0049 00
WARN I N G
Ensure battery disconnect switch is in OFF position before performing this task. Failure to follow this
warning may result in injury to personnel or damage to equipment.
N OT E
Tag wires prior to removal to ensure cor-
rect installation.
1.
Loosen setscrew (21) and remove temperature control
knob (22) from right-side control console cover (23).
427-B0886
0049 00-5