4
TM 5-3805-290-23-2
TRANSMISSION OIL FILTER BASE REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Rag, wiping (Item 41, WP 0206 00)
Unit
Tag, marker (Item 54, WP 0206 00)
Tools and Special Tools
O-ring (5)
Tool kit, general mechanic's (Item 96, WP 0205 00)
Personnel Required
Shop equipment, common no. 1 (Item 77, WP 0205
MOS 62B, Construction Equipment Repairer
References
Materials/Parts
TM 5-3805-290-10
Cap set, protective (Item 8, WP 0206 00)
Equipment Conditions
Chassis guards underneath left-side ladder removed
Cleaning compound, solvent, type III (Item 9, WP
Filter element removed (WP 0086 00)
Oil, lubricating, OEA-30, Arctic (Item 32, WP
Drawings Required
TM 5-3805-290-23P, Figure 73
Oil, lubricating, OE/HDO-40 (Item 33, WP 0206
Estimated Time to Complete Task
Oil, lubricating, TO-4 (Item 36, WP 0206 00)
1.5 hr
WARN I N G
When servicing this machine, performing maintenance, or disposing of hazardous materials, consult your
unit/local hazardous waste disposal center or safety office for local regulatory guidance. If further informa-
tion is needed, please contact The Army Environmental Hotline at 1-800-872-3845.
Lubricating/hydraulic oils used in the performance of maintenance can be very slippery. Immediately wipe up
any spills. Failure to follow this warning may result in injury to personnel.
To prevent injury to personnel, wear protective eye covering and gloves.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.