TM 5-3805-290-23-2
OIL PAN REPLACEMENT - CONTINUED
0157 00
INSTALLATION
N OT E
Apply silicone sealant to cylinder block between bolt holes 5 and 6 and between bolt holes 25 and 26 in
sequence shown below.
1.
Install new gasket (3) and engine oil pan (2) on cylinder block (4).
2.
Install 26 engine oil pan bolts and two nuts (1) on cyl-
inder block (4). Tighten bolts to 16 lb-ft (22 Nm)
using sequence shown.
427-B0141
3.
Fill engine oil pan to correct level indicated on engine oil level gage (WP 0025 00).
4.
Install rear axle (WP 0180 00).
5.
Run engine until normal operating temperature is reached (TM 5-3805-290-10).
6.
Shut down engine (TM 5-3805-290-10).
7.
Check for leaks.
END OF WORK PACKAGE
0157 00-3/(0157 00-4 Blank)