TM 5-3805-290-23-2
OIL PUMP REPLACEMENT - CONTINUED
0160 00
CLEANING AND INSPECTION
WARN I N G
Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low-toxic
material. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in
well-ventilated areas. Keep away from open flames and other sources of ignition. Failure to do so may
result in injury or death to personnel.
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure
when drying parts with compressed air. DO NOT direct compressed air against human skin. Make
sure air stream is directed away from user and other personnel in the area. To prevent injury, user
must wear protective goggles or face shield. Failure to follow this warning may result in injury to per-
sonnel.
N OT E
If any part of the oil pump is worn
enough to affect the performance of
the oil pump, the oil pump must be
replaced.
Refer to Specifications in this work
package for clearances and torques.
1.
Remove cover from oil pump.
427-B2059
2.
Remove outer rotor. Clean all parts. Look for cracks in
metal or other damage.
3.
Install outer rotor. Measure clearance of outer rotor to
body.
427-B2060
0160 00-3
