TM 5-3805-291-10
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS - CONTINUED
0004 00
BUCKET KICKOUT SET SWITCH
0004 00
To set the lift kickout, raise the bucket to the desired position above the midway point. Then depress the top of switch.
The boom will return to the programmed position when the raise detent is activated and the boom is below the kickout posi-
tion.
To set the lower kickout, lower the bucket to the desired position below the midway point. Then depress the top of switch.
The boom will return to the programmed position when the float detent is activated and the boom is at least 12 in. (30.5 cm)
above the kickout position.
C AU T I O N
If the boom is 12 in. (30.5 cm) or less above the lower kickout position, placing the lift control lever in
the float detent will cause the bucket to float and the bucket will hit the ground.
To set the rotation of the tiltback for the work tool,
depress the bottom of switch.
427-C0473