TM 5-3805-291-10
DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS - CONTINUED
0004 00
HOOD TILT
0004 00
The switch that controls the engine hood is located in a compartment on the left side of the machine.
CAU T I ON
Do not continue to hold toggle switch in open or in closed position after movement of hood has
stopped. When audible clicks are heard, release toggle switch. Failure to release toggle switch will
result in damage to actuator.
1.
Open the access door.
2.
Turn battery disconnect switch to ON position.
3.
Pull out the toggle switch. Move the toggle switch to
position (1) in order to raise the hood. Release the tog-
gle switch. The toggle switch will return to the middle
position (2).
4.
Pull out the toggle switch. Move the toggle switch to
position (3) in order to lower the hood. Hold the
switch in this position until the hood is fully closed.
Release the toggle switch. The toggle switch will
return to the middle position (2).
427-C0057
0004 00
HOOD TILT - MANUAL OPERATION
The hood can be opened manually by using a ratchet, two extensions, and socket (Items 2, 3, 8, and 9, Table 2, WP 0026
00) to turn the shaft of the lift motor.
1.
Remove four bolts and cover.
2.
Insert socket through the hole and onto the shaft of the lift motor. Turn the shaft clockwise (to the right) to raise the
hood. Turn the shaft counterclockwise (to the left) to lower the hood.
427-C1973
