TM 5-3805-291-10
TROUBLESHOOTING PROCEDURES - CONTINUED
0010 00
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
HYDRAULIC SYSTEM
1. Travel Time of Lift Cylinders is Slow.
WARN I N G
Stand clear of frame articulation area when machine is operat-
ing. There is no clearance for personnel in this area when
machine turns. Crushing could occur, resulting in injury or
death to personnel.
If hydraulic oil level is low, fill to
1.
Check hydraulic oil level (WP
correct level (WP 0004 00). If
problem still exists, go to test step
2.
2.
Check hydraulic lift cylinders for
Clean any debris from cylinder(s).
any buildup of debris.
If problem still exists, go to test
step 3.
3.
Check loader control joystick for
If any damage is found, notify Unit
damage that would restrict
Maintenance.
freedom of movement.
2.
Work Tool/Loader Arm Operating
Speeds are Too Slow.
WARN I N G
Stand clear of frame articulation area when machine is operat-
ing. There is no clearance for personnel in this area when
machine turns. Crushing could occur, resulting in injury or
death to personnel.
1.
Check hydraulic oil level (WP
If hydraulic oil level is low, fill to
correct level (WP 0004 00). If
problem still exists, go to test step
2.
2.
Check hydraulic lift cylinders, tilt
Clean any debris from cylinders
cylinder, and linkage for buildup
and linkage. If problem still exists,
of debris.
notify Unit Maintenance.
0010 00-12
