TM 5-3805-291-23-1
TROUBLESHOOTING WITH A DIAGNOSTIC CODE - CONTINUED
0009 00
Table 3. Powertrain Control - Continued.
(MID 081)
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
5. Check sensor adjustment.
0672 01 - Continued.
(a) Check torque converter output speed
sensor adjustment (WP 0091 00).
(b) Repeat Test 4. Observe status of
1. If diagnostic code is present, go to Test
diagnostic code.
6.
2. If diagnostic code is not present,
diagnostic code does not exist at this
time. Resume normal machine
operation.
6. Check if diagnostic code remains active.
(a) Disconnect connectors J1 and J2 from
powertrain ECM (WP 0063 00).
Inspect and clean contacts of wiring
harness connectors.
(b) Reconnect all harness connectors.
(c) Engine start and battery disconnect
switches remain in ON position (TM 5-
3805-291-10).
(d) Use messenger to clear all inactive
diagnostic codes.
(e) Operate machine (TM 5-3805-291-
10).
(f) Check whether CID 0672 FMI 01 is
1. If CID 0672 FMI 01 is present, repeat
present.
diagnostic code procedure CID 0672
FMI 01. If cause of diagnostic code is
not found, replace powertrain ECM
(WP 0063 00).
2. If diagnostic code is not present,
diagnostic code does not exist at this
time. Resume normal machine
operation.
0009 00-63