TM 5-3805-291-23-1
COOLING SYSTEM LINES REPLACEMENT - CONTINUED
0043 00
INSTALLATION
N OT E
Apply a thin coat of clean antifreeze to all O-rings prior to installation.
1.
Connect hoses (48 and 46) to heater core (53).
2.
Position clip (52) and install washer (51) and nut (50).
3.
Install clip (49) on cab wall.
4.
Connect hose (48) to tube (44) and tighten two clamps (47).
5.
Connect hose (46) to tube (42) and tighten two clamps (45).
6.
Connect hose (37) to tube (44) and tighten clamp (43).
7.
Connect hose (34) to tube (42) and tighten clamp (41).
8.
Install four washers (39) and bolts (38) on clips (40).
9.
Connect hose (37) to engine block and tighten clamp (36).
10.
Connect hose (34) to water pump (35) and tighten clamp (33).
427-C0390
0043 00-7
