TM 5-3805-291-23-2
IMPLEMENT ELECTRONIC CONTROL MODULE (ECM) REPLACEMENT - CONTINUED
0060 00
REMOVE ECM
00060 00
WARN I N G
Ensure battery cables are disconnected before performing this task. Failure to follow this warning may
result in injury to personnel or damage to equipment.
N OT E
Follow troubleshooting procedures in this manual to ensure replacing the ECM will correct the prob-
lem.
Ensure that all diagnostic codes are noted before removing ECM.
1.
Disconnect battery cables from batteries (WP 0096 00).
2.
Remove three screws (1) and two screws (2) from interior panel (3).
3.
Remove interior panel (3) from machine.
0060 00-4