TM 5-3805-291-23-2
BATTERIES REPLACEMENT - CONTINUED
0096 00
REMOVAL - CONTINUED
8.
Remove two nuts (5) and washers (6) from rod (4) battery hold down (8).
9.
Remove battery hold down (8) from batteries (14 and 17).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may cause injury or
death to personnel.
N OT E
Standard battery weighs 119 lb (54 kg).
Arctic battery weighs 60 lb (27 kg).
10.
With assistance, remove two batteries (14 and 17) from upper battery compartment (20).
11.
Pull back cover (21) on cable clamp (36).
12.
Loosen nut (35) and disconnect cable clamp (36) on cable (37) from battery (34).
13.
Pull back cover (30) on cable clamp (32).
14.
Loosen nut (31) and disconnect cable clamp (32) on cable (29) from battery (33).
15.
Remove nut (26) and washer (27) from battery hold down (28).
16.
Remove battery hold down (28) from batteries (33 and 34).
17.
With assistance, remove batteries (33 and 34) from lower battery compartment (20).
18.
Pull back two covers (22) on cable clamps (24).
19.
Loosen two nuts (23) and disconnect cable clamps (24) on cable (25) from batteries (33 and 34).
0096 00-3
