TM 5-3805-291-23-2
BATTERIES REPLACEMENT - CONTINUED
0096 00
INSTALLATION
1.
Install battery cable (25) on batteries (33 and 34).
2.
Tighten two nuts (23) on cable clamps (24) and install two covers (22) on cable clamps.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting equipment used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting equipment. Failure to follow this warning may cause injury or
death to personnel.
N OT E
Standard battery weighs 119 lb (54 kg).
Arctic battery weighs 60 lb (27 kg).
3.
With assistance, position batteries (33 and 34) in lower battery compartment (20).
4.
Install battery hold down (28) on batteries (33 and 34).
5.
Install washer (27) and nut (26) on battery hold down (28).
6.
Connect cable clamp (32) on cable (29) to battery (33) and tighten nut (31).
7.
Install cover (30) on cable clamp (32).
8.
Connect cable clamp (36) on cable (37) to battery (34) and tighten nut (35).
9.
Install cover (21) on cable clamp (36).
10.
With assistance, position batteries (14 and 17) in upper battery compartment (20).
11.
Install battery hold down (8) on batteries (14 and 17).
12.
Install two washers (6) and nuts (5) on battery hold down (8) and rod (4).
0096 00-4