TM 5-3805-291-23-2
TRANSMISSION OIL FILTER BASE, LINES, AND BYPASS SWITCH REPLACEMENT - CONTINUED 0104 00
INSTALLATION - CONTINUED
17.
Position filter base assembly (7) on machine.
18.
Install three washers (17) and bolts (16) on filter base assembly (7).
19.
Connect bypass switch (14) to chassis wiring harness (15).
20.
Install new O-ring (12), hose (13), flanges (11 and 10), four washers (9), and bolts (8) on filter base assembly (7).
21.
Install new O-ring (5), hose (6), flanges (4 and 3), four washers (2), and bolts (1) on filter base assembly (7).
427-C0346
WAR N I N G
Before operating the machine, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
22.
Secure steering frame lock in stowed position (TM 5-3805-291-10).
23.
Start machine (TM 5-3805-291-10).
24.
Run engine until operating temperature is reached and verify correct operation of machine (TM 5-3805-291-10).
25.
Shut down engine (TM 5-3805-291-10).
26.
Check for leaks.
END OF WORK PACKAGE
0104 00-7/(0104 00-8 Blank)
