TM 5-3805-291-23-2
TRANSMISSION OIL FILTER ELEMENT REPLACEMENT - CONTINUED
0105 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
Use a container to catch any fluid that may drainfrom system. Dispose of fluid IAW local policy and
ordinances. Ensure all spills are cleaned up.
Transmission oil filter is located on right side of machine under platform.
1.
Run engine until normal operating temperature is reached (TM 5-3805-291-10).
2.
Shut down engine (TM 5-3805-291-10).
3.
Open access panel (TM 5-3805-291-10).
4.
Remove filter housing drain plug (1) and allow oil in
filter to drain.
5.
Remove and discard O-ring (2) from filter housing
drain plug (1).
6.
Remove filter housing (3) and O-ring (4) from
machine. Discard O-ring.
427-C0128
7.
Remove used filter element (5) from filter housing (3). Discard filter element.
0105 00-2
