4
TM 5-3805-291-23-2
TRANSMISSION TEST LINES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Maintenance Level
Spill containment unit, hazardous material (Item
Unit
41, WP 0233 00)
Strap, tiedown, electrical components (Item 42, WP
Tools and Special Tools
Tool kit, general mechanic's, automotive (Item 90,
Tag, marker (Item 43, WP 0233 00)
O-ring (36)
Shop equipment, automotive maintenance and
Personnel Required
repair: organizational maintenance, common no.
MOS 62B, Construction Equipment Repairer
1 (Item 70, WP 0232 00)
Equipment Conditions
Materials/Parts
Hydraulic filter access door opened (TM 5-3805-
291-10)
Cap set, protective (Item 6, WP 0233 00)
Hydraulic system pressure relieved (TM 5-3805-
Oil, lubricating, OE/HDO-40 (Item 26, WP 0233
291-10)
00)
Hydraulic tank drained (WP 0148 00)
Oil, lubricating, OEA-30, Arctic (Item 29, WP
Drawings Required
TM 5-3805-291-23P, Figure 92
Oil, lubricating, TO-4 (Item 31, WP 0233 00)
Estimated Time to Complete Task
Rag, wiping (Item 35, WP 0233 00)
3.0 hr
WARN I N G
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
Hydraulic oil used in the performance of maintenance can be very slippery. Immediately wipe up any
spills. Failure to follow this warning may result in injury to personnel.
