TM 5-3805-291-23-2
TRANSMISSION TEST LINES AND FITTINGS REPLACEMENT - CONTINUED
0106 00
REMOVAL - CONTINUED
5.
Disconnect six lines (1) from elbows (9). Remove and
discard six O-rings (10).
6.
Remove six elbows (9) from fittings (11). Remove and
discard six O-rings (12).
7.
Remove six fittings (11) from machine. Remove and
discard six O-rings (13).
INSTALLATION
N OT E
Apply a thin coat of clean oil to all O-rings prior to installation.
1.
Install six new O-rings (13) and fittings (11) on machine.
2.
Install six new O-rings (12) and elbows (9) on fittings (11).
3.
Install six new O-rings (10) and connect lines (1) to elbows (9).
4.
Install all associated clips (8) and new tiedown straps (7).
5.
Install six new O-rings (6) and fittings (4) on machine.
6.
Install six new O-rings (5) and elbows (2) on fittings (4).
7.
Install six new O-rings (3) and connect lines (1) to elbows (2).
8.
Fill hydraulic tank (WP 0148 00).
9.
Operate machine and verify correct operation (TM 5-3805-291-10).
10.
Shut down engine (TM 5-3805-291-10).
11.
Check for leaks.
12.
Close access door (TM 5-3802-291-10).
END OF WORK PACKAGE
0106 00-3/(0106 00-4 Blank)
