TM 5-3805-291-23-2
FRONT DRIVE SHAFT CARRIER BEARING REPLACEMENT - CONTINUED
0108 00
INSTALLATION
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may result in injury to personnel.
N OT E
Front drive shaft weighs 40 lb (18 kg).
Apply a thin coat of clean oil to front drive shaft journal and to carrier bearing bore.
1.
Use lifting equipment to support front drive shaft (1).
2.
Install carrier bearing (6) over front drive shaft (1).
3.
Install spacers (5) and bolts (4) on machine.
4.
Install setscrew (3) in lock ring (2). Tighten setscrew so slot in setscrew aligns with lock ring slot.
5.
Install lock ring (2) on front drive shaft (1).
6.
Install parking brake (WP 0113 00).
WAR N I N G
Before operating the machine, secure the steering frame lock in the stowed position. DO NOT operate
machine with steering frame lock connected. Failure to lock steering frame lock into the stowed position
before operating can result in loss of steering and injury or death to personnel.
7.
Secure steering frame lock in stowed position (TM 5-3805-291-10).
8.
Drive machine and verify correct operation of drive shaft carrier bearing (TM 5-3805-291-10).
END OF WORK PACKAGE
0108 00-3/(0108 00-4 Blank)
