8
TM 5-3805-291-23-2
PARKING BRAKE MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Personnel Required
Maintenance Level
MOS 62B, Construction Equipment Repairer
Unit
References
Tools and Special Tools
TM 5-3805-291-10
Tool kit, general mechanic's, automotive (Item 90,
Equipment Conditions
Center drive shaft removed (WP 0107 00)
Shop equipment, automotive maintenance and
Drawings Required
repair: organizational maintenance, common no.
1 (Item 70, WP 0232 00)
TM 5-3805-291-23P, Figure 100
Pump, hydraulic ram, hand driven (Item 57, WP
Estimated Time to Complete Task
4.0 hr
Wrench, torque, click, ratcheting, 1/2" drive, 250
lb-ft (Item 99, WP 0232 00)
Materials/Parts
Cleaning compound, solvent, type III (Item 7, WP
Rag, wiping (Item 35, WP 0233 00)
WARN I N G
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
N OT E
Use a container to catch any oil that may drain from hoses or system. Dispose of fluid IAW local policy and
ordinances. Ensure all spills are cleaned up.