TM 5-3805-291-23-2
MAIN CONTROL VALVE AND IMPLEMENT PUMP HYDRAULIC
HOSES, LINES, AND FITTINGS REPLACEMENT - CONTINUED
0157 00
INSTALLATION - CONTINUED
4.
Install three clamps (68) on two hoses (63).
5.
Install two washers (67) and bolts (66) on machine.
6.
Install two new O-rings (65) in fittings (57 and 61) and install fittings on machine.
7.
Connect two hoses (63) to hydraulic tank (WP 0159 00).
8.
Install two new O-rings (64) in hoses (63) and connect hoses to fittings (57 and 61).
9.
Install new O-ring (62) in test port (59) and install test port on fitting (61).
10.
Install new O-ring (60) in hose (23) and connect hose to test port (59).
11.
Install new O-ring (58) in hose (16) and connect hose to fitting (57).
12.
Install grommet (56) on hose (32) and position hose on coupling (55). Install four washers (54) and bolts (53).
13.
Install new O-ring (52) on hose (28) and position hose on coupling (51). Install four washers (50) and bolts (49).
427-C1300
0157 00-9