TM 5-3805-291-23-2
BROOM SHIELDS AND SPRINGS REPLACEMENT - CONTINUED
0166 00
SPRING REMOVAL
WARN I N G
Spring is under tension. Wear eye protection and use extreme caution when removing spring to avoid
injury to personnel.
N OT E
The following procedure is for one spring. The procedure can be used for both springs.
1.
Secure spring (14) with come-along.
2.
Remove pin (15) from spring tensioner (16).
3.
Remove link (17) from spring tensioner (16).
4.
Relieve tension on spring (14).
5.
Remove link (17) from spring (14) and remove come-
along.
6.
Remove spring (14) from spring hitch (18).
427-C1546
SPRING INSTALLATION
1.
Install spring (14) on spring hitch (18).
2.
Install spring (14) on link (17).
3.
Secure spring (14) with come-along.
4.
Install link (17) on spring tensioner (16).
5.
Install pin (15) in spring tensioner (16).
6.
Relieve tension on spring (14) and remove come-along.
7.
Install broom assembly (TM 5-3805-291-10).
8.
Verify correct operation of broom (TM 5-3805-291-10).
END OF WORK PACKAGE
0166 00-4