8
TM 5-3805-291-23-2
PALLET FORKS REPAIR
THIS WORK PACKAGE COVERS
Disassembly, Assembly
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Unit
Oil, lubricating, OEA-30, Arctic (Item 29, WP
Tools and Special Tools
Rag, wiping (Item 35, WP 0233 00)
Tool kit, general mechanic's, automotive (Item 90,
Tag, marker (Item 43, WP 0233 00)
Cotter pin (6)
Shop equipment, automotive maintenance and
repair: organizational maintenance, common no.
O-ring (22)
1 (Item 70, WP 0232 00)
Personnel Required
Bracket, link (Item 15, WP 0232 00)
MOS 62B, Construction Equipment Repairer (2)
Lifting equipment, 400-lb capacity
Lifting equipment, 3,000-lb capacity
Equipment Conditions
Pallet fork assembly removed (TM 5-3805-291-10)
Materials/Parts
Cap set, protective (Item 6, WP 0233 00)
Drawings Required
Oil, lubricating, OE/HDO-5/40 (Item 27, WP 0233
TM 5-3805-291-23P, Figure 171
00)
Estimated Time to Complete Task
Oil, lubricating, OE/HDO-15/40 (Item 28, WP
4.0 hr
DISASSEMBLY
WARN I N G
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury to personnel.
Hydraulic oil used in the performance of maintenance can be very slippery. Immediately wipe up any
spills. Failure to follow this warning may result in injury to personnel.
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug open-
ings after removing lines. Contamination of system could result in premature failure.
