TM 5-3805-291-23-2
BUCKET TIPS AND CUTTING EDGES REPLACEMENT - CONTINUED
0170 00
BUCKET CUTTING EDGES INSTALLATION
1.
Use hammer and punch or pin-master tool to install corner edge (18) and two pins (17) on bucket (16).
2.
Repeat step 1 for opposite side of bucket (16).
3.
Install cutting edges (15), washers (14), bolts (12), and nuts (13) on bucket (16). Tighten nuts to 1,700 + 200 lb-ft
(2,300 + 300 Nm).
4.
Start machine (TM 5-3805-291-10).
5.
After 3 to 5 hours of operation, check all bolts for proper torque.
END OF WORK PACKAGE
0170 00-7/(0170 00-8 Blank)