TM 5-3805-291-23-2
ENGINE REPLACEMENT - CONTINUED
0171 00
REMOVAL
C AU T I O N
Wipe area clean around all connections to be opened during removal. Cap lines and hoses and plug
openings after removing lines. Contamination of system could result in premature failure.
N OT E
Tag hoses and wires prior to removal to ensure correct installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid IAW local pol-
icy and ordinances. Ensure all spills are cleaned up.
1.
Remove three bolts (1) and washers (2) and position
accumulator and dryer assembly (3) aside.
2.
Remove three bolts (4), six washers (5), and two clips
(6) from cover (7).
3.
Position cold start injector line (8) aside.
4.
Remove cover (7) from machine.
427-C0480
5.
Disconnect wiring harness (9) from sensor (10).
6.
Remove five bolts (11), washers (12), spacer (13), and
three bracket assemblies (14) from engine (15).
427-C0481
