TM 5-3805-292-10
0010
INSTALLATION CONTINUED
CAUTION
Machines have quick disconnect covers to prevent contamination. Always clean hydraulic
couplers and the areas around couplers prior to making connections to avoid
contamination of system. Failure to follow this caution may cause damage to equipment.
7. With assistance, remove dust covers (Figure 2, Item 1).
8. With assistance, connect male (Figure 2, Item 3) and female quick disconnects (Figure 2, Item 2) by pushing
them together.
1
2
3
458-0726
Figure 2. Male and Female Quick Disconnects.
0010
END OF TASK
REMOVAL
00010
WARNING
Before disengaging or engaging attachment coupler to work tool, use extreme caution to
ensure work tool is in a safe and stable position before proceeding. Work tool must NOT
be loaded. All personnel must stand clear. Failure to follow this warning may result in
injury or death to personnel or damage to equipment.
1. Lower loader arms against chassis stops and tilt attachment coupler until work tool is almost on floor but not
touching. Refer to Operating Loader (WP 0005).