• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 1. Air Cleaner Housing Cover.
Figure 3. Secondary Element.

Operators Manual For M400T And M400W
Page Navigation
  204    205    206    207    208  209  210    211    212    213    214  
img
TM 5-3805-292-10
0021
SERVICE CONTINUED
6. Use a rag to clean inside of air cleaner housing (Figure 2, Item 1).
WARNING
Particles blown by compressed air are hazardous. Use a maximum of 30 PSI (207 kPa)
when cleaning components. DO NOT direct compressed air against human skin. Make
sure air stream is directed away from user and other personnel in the area. To prevent
injury, user must wear protective goggles or face shield. Failure to follow this warning may
result in injury or death to personnel.
CAUTION
Rough handling of air cleaner primary element will damage element.
7. Direct compressed air, from inside out, into primary element (Figure 2, Item 2), while turning element. If dust
and dirt does not come out easily, tap primary element gently to dislodge solid material.
8. Check inside of element with a light to verify there is no damage. Light should not shine through if element is in
good condition.
9. Check primary element sealing gaskets for damage.
10. Obtain replacement primary element (Figure 2, Item 2) if worn or damaged.
0021-3


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.