TM 5-3805-292-10
0020
Table 2. Preventive Maintenance Checks and Services (PMCS)
for the Work Tool Attachments.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT READY/
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
AVAILABLE IF:
WORK
TOOL
ATTACH-
MENTS
1
Before
Bucket
a. Check bucket for bends, cracks, Damage that would impair
operation is evident.
and broken welds.
b. Inspect hydraulic hose
Damage that would cause
Class III leaks is evident.
assemblies for cracks, brittle
covers, or other damage.
2
Damage that would impair
Before
Pallet Fork
a. Check for cracked, bent, or
operation is evident.
otherwise damaged fork frame
and fork tines. Inspect for
broken welds.
Fork tine locks do not
b. Ensure fork tine locks function
function.
and fork tines can be adjusted
side to side and locked into
position.
3
Before
Auger
a. Inspect for missing or broken
Teeth or point are missing
or broken.
teeth or point. Refer to WP
b. Inspect drive unit for cracks,
Cracks, damage, loose or
missing fasteners, or
damage, loose or missing
broken welds are evident.
fasteners, and broken welds.
c. Inspect pins/clevis pins for
Pins/clevis pins are
cracks, bends, breaks, or wear. cracked, bent, broken, or
worn.
d. Inspect drive unit output shaft
Output shaft is cracked,
bent, broken, or worn.
for cracks, bends, breaks, or
wear.
0020-64
