TM 5-3805-292-10
0023
TRACK TENSION CHECK CONTINUED
WARNING
Do not place hands or feet between track and roller wheel. Failure to follow this warning
may result in injury to personnel.
4. With assistance, measure from lower track top surface to bottom of center roller wheel (Figure 2) using punch
from BII.
NOTE
Allowable track sag is 1/2 to 3/4 in.
INCH
458-0306
Figure 2. Track Tension Check.
0023
5. If out of adjustment, proceed to Tension Adjustment. If adjustment is good, start engine and lower machine to
ground.
END OF TASK