TM 5-3805-292-10
0023
TENSION ADJUSTMENT
0023
1. Remove two bolts (Figure 3, Item 1), washers (Figure 3, Item 2), and access cover (Figure 3, Item 3) from
machine.
1,2
458-0305
3
Figure 3. Access Cover.
0023
WARNING
Use caution when adjusting track tension.
Grease is under extreme pressure. Use full coverage face protection.
Over-tightening or excessive slack may cause premature wear or damage to track.
Failure to follow these warnings may result in serious injury to personnel and damage to
equipment.
2. If track tension needs to be increased, slowly add grease to fitting (Figure 4, Item 1).
3. If track tension needs to be decreased, loosen grease fitting (Figure 4, Item 1).
1
458-0160
Figure 4. Grease Fitting.
0023