TM 5-3805-292-23
0009
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
WARN I N G
Hydraulic
Drive Motor
(Final Drive
Oil) M400T
ONLY
Contact with engine/hydraulic oil can damage skin.
Wear gloves when handling engine/hydraulic oil. If oil
contacts skin, wash it off immediately. Failure to follow
this warning may result in injury to personnel.
N OT E
This procedure is for the left final drive motor. Repeat
this procedure for the right final drive motor.
8
250 Hours
0.6
a. Park machine on level ground
with final drive in fill position.
b. Remove drain/fill plug.
c. Ensure oil level is just to bottom
of oil fill orifice.
d. Install drain/fill plug.
Figure 4. Final Drive Motor.
0009
